[1] Zhang C, Yin S, Zhang H, et al. Shape variation and flat plateau formation of a frozen nanofluid droplet[J]. Applied Thermal Engineering, 2024, 236: 121503.
[2] Zhou X, Yamashita S, Kubota M, et al. Macro encapsulated Cu-based phase change material for high temperature heat storage with characteristic of self-sealing and high durability[J]. Applied Thermal Engineering, 2023, 229.
[3] Zhang C, Yin S, Zhang H, et al. Simulation of a sessile nanofluid droplet freezing with an immersed boundary-lattice Boltzmann model[J]. International Journal of Multiphase Flow, 2023, 167.
[4] Wang D, Wang D, Hong F, Zhang C. Experimental study on flow boiling characteristics of R-1233zd(E) of counter-flow interconnected minichannel heat sink[J]. International Journal of Heat and Mass Transfer, 2023, 215.
[5] Yin S, Huang Y, Shen X, Zhang C. Triple-layered encapsulation through direct droplet impact[J]. Journal of Colloid and Interface Science, 2022, 615: 887-896.
[6] Sun Y S, Han Y, Li G D, Zhang C Y. Numerical study of high-temperature cascaded packed bed thermal energy storage system[J]. Case Studies in Thermal Engineering, 2022, 37.
[7] Zhang C, Zhang H, Zhao Y, et al. An immersed boundary-lattice Boltzmann model for simulation of deposited particle patterns in an evaporating sessile droplet with dispersed particles[J]. International Journal of Heat and Mass Transfer, 2021, 181.
[8] Zhang C, Zhang H, Zhang X, et al. Evaporation of a sessile droplet on flat surfaces: An axisymmetric lattice Boltzmann model with consideration of contact angle hysteresis[J]. International Journal of Heat and Mass Transfer, 2021, 178: 121577.
[9] Zhang X, Zhu Z, Zhang C, et al. Reduced contact time of a droplet impacting on a moving superhydrophobic surface[J]. Applied Physics Letters, 2020, 117(15).
[10] Zhang H, Zhao Y, Fang W, Zhang C. Active control of the freezing process of a ferrofluid droplet with magnetic fields[J]. Applied Thermal Engineering, 2020, 176.
[11] Zhang C, Zhang H, Fang W, et al. Axisymmetric lattice Boltzmann model for simulating the freezing process of a sessile water droplet with volume change[J]. Physical Review E, 2020, 101(2): 023314.
[12] Fang W Z, Zhang H, Zhang C Y, et al. Freezing process of ferrofluid droplets: Numerical and scaling analyses[J]. Physical Review Fluids, 2020, 5(5).
[13] Gong S, Zhang C Y, Cheng P. Direct Numerical Simulations of Pool Boiling Heat Transfer and Thermal Responses Inside the Heater by Lattice Boltzmann Method[J]. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2019, 40(1): 135-142.
[14] Zhang C, Cheng P, Minkowycz W J. Lattice Boltzmann simulation of forced condensation flow on a horizontal cold surface in the presence of a non-condensable gas[J]. International Journal of Heat and Mass Transfer, 2017, 115(Part B): 500-512.
[15] Zhang C, Cheng P. Mesoscale simulations of boiling curves and boiling hysteresis under constant wall temperature and constant heat flux conditions[J]. International Journal of Heat and Mass Transfer, 2017, 110(2017): 319-329.
[16] Cheng P, Gong S, Zhang C. Lattice Boltzmann Simulations of Saturated Pool Boiling from Smooth and Rough Horizontal Surfaces, Thome J, editor, Encyclopedia of Two-Phase Heat Transfer and Flow IV: WORLD SCIENTIFIC, 2017: 209-238.
[17] Cheng P, Zhang C, Gong S. Numerical simulation of complete pool boiling curves: From nucleation to critical heat flux through transition boiling to film boiling[C]. 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2017, 2017.
[18] Cheng P, Zhang C, Gong S. Lattice Boltzmann Simulations of Macro/Microscale Effects on Saturated Pool Boiling Curves for Heated Horizontal Surfaces[J]. Journal of Heat Transfer, 2017, 139(11): 110801.
[19] Cheng P, Zhang C, Gong S. Lattice Boltzmann Simulations of Interfacial Effects on Saturated Pool Boiling Curves for Horizontal Heated Surfaces[J]. Journal of Heat Transfer, 2017.
[20] Zhang C Y, Wang T, Chen D H, et al. Confined jet array impingement cooling with spent flow distraction using NEPCM slurry[J]. International Communications in Heat and Mass Transfer, 2016, 77(2016): 140-147.
[21] Zhang C, Cheng P, Hong F. Mesoscale simulation of heater size and subcooling effects on pool boiling under controlled wall heat flux conditions[J]. International Journal of Heat and Mass Transfer, 2016, 101(2016): 1331-1342.
[22] Zhang C, Cheng P, Cao J. Mesoscale simulation of Marangoni convection about a vapor bubble in a liquid with temperature gradients under microgravity conditions[J]. International Communications in Heat and Mass Transfer, 2016, 78(2016): 295-303.
[23] Hong F J, Zhang C Y, Chen D H, et al. Confined jet array impingement cooling using NEPCM nanofluids[C]. ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016, 2016.
[24] Cheng P, Gong S, Zhang C Y. Lattice Boltzmann simulations of boiling heat transfer phenomena: A new research frontier for numerical heat transfer[C]. International Conference on Computational Methods for Thermal Problems, 2016.
[25] Zhang C, Hong F, Cheng P. Simulation of liquid thin film evaporation and boiling on a heated hydrophilic microstructured surface by Lattice Boltzmann method[J]. International Journal of Heat and Mass Transfer, 2015, 86(2015): 629-638.
[26] Hong F J, Zhang C Y, He W, et al. Confined jet array impingement boiling of subcooled aqueous ethylene glycol solution[J]. International Communications in Heat and Mass Transfer, 2014, 56: 165-173.
[27] Hong F J, Zhang C Y, He W, et al. The local and average heat transfer characteristic of confined jet array impingement boiling of aqueous ethylene glycol solutions[C]. ASME 2013 4th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2013, 2013.
[28] 王东玉，洪芳军，张朝阳，一种铜基逆流连通微通道的沸腾实验研究[J]. 工程热物理学报，2023；
[29] 赵晨，苗天泽，张朝阳等，负压状态窄缝通道乙二醇水溶液传热特性[J]. 化工进展，2023；
[30] 胡茜芮，张朝阳，洪芳军，高温相变胶囊梯级储热系统实验研究[J]. 储能系统与工程，2023；
