2013.09-2019.12 工学博士
上海交通大学 塑性成形技术与装备研究院
2009.09-2013.06 工学学士
哈尔滨工业大学 材料科学与工程学院
学习经历
研究方向
结合原位表征实验与有限元仿真的材料弹塑性变形与失效机制研究
材料加工过程的多尺度模拟与基于软件二次开发的损伤断裂预测方法
基于核技术与仿真方法结合的材料极端服役力学行为研究
面向核结构材料寿命预测的计算软件平台构建
材料加工过程的多尺度模拟与基于软件二次开发的损伤断裂预测方法
基于核技术与仿真方法结合的材料极端服役力学行为研究
面向核结构材料寿命预测的计算软件平台构建
代表性论文专著
1.Xiaoqing Shang, Haiming Zhang, Leyun Wang, Gaoming Zhu, Zhenshan Cui, M.W. Fu,Xiaoqin Zeng. The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy. International Journal of Plasticity, 2021(144): 103040.
2. Xiaoqing Shang, Haiming Zhang, Zhenshan Cui, M.W. Fu, Jianbo Shao. A multiscale investigation into the effect of grain size on void evolution and ductile fracture: Experiments and crystal plasticity modeling, International Journal of Plasticity, 2020(125): 133-149.
3.Xiaoqing Shang, Zhenshan Cui, M.W. Fu. Dynamic recrystallization based ductile fracture modeling in hot working of metallic materials. International Journal of Plasticity, 2017(95):105-122.
4.Xiaoqing Shang, Zhenshan Cui, M.W. Fu. A ductile fracture model considering stress state and Zener-Hollomon parameter for hot deformation of metallic materials. International Journal of Mechanical Sciences, 2018(144): 800-812.
5.Yangqi Li, Haiming Zhang, Xiaoqing Shang, Mingxiang Liu, Shilin Zhao, Zhenshan Cui. A multiscale investigation on the preferential deformation mechanism of coarse grains in the mixed-grain structure of 316LN steel. International Journal of Plasticity, 2022(152):103244,
6.Qingchun Zhu, Xiaoqing Shang, Huan Zhang, Xixi Qi, Yangxin Li, Xiaoqin Zeng. Influence of Al2Y particles on mechanical properties of Mg-11Y-1Al alloy with different grain sizes.Materials Science and Engineering: A, 2022(831): 142166.
7.Chuanyuan Mao, Weijun Yu, Min Jin, Yingchen Wang, Xiaoqing Shang, Lu Lin, Xiaoqin Zeng, Liqiang Wang, Eryi Lu. Mechanobiologically optimized Ti-35Nb-2Ta-3Zr improves load transduction and enhances bone remodeling in tilted dental implant therapy. Bioactive Materials, 2022(16): 15-26.
8.Sheng Zhang, Leyun Wang, Gaoming Zhu, Martin Diehl, Alireza Maldar, Xiaoqing Shang, Xiaoqin Zeng. Predicting grain boundary damage by machine learning. International Journal of Plasticity, 2022(150): 103186.
9.Gaoming Zhu, Leyun Wang, Yingjun Sun, Xiaoqing Shang, Jie Wang, Huamiao Wang, Xiaoqin Zeng. Grain-size effect on the deformation of Mg-3Al-3Sn alloy: Experiments and elastic viscoplastic self-consistent modeling. International Journal of Plasticity, 2021(143):103018.
10.Huan Zhang, Yangxin Li, Zhigang Ding, Tian Xie, Ruixue Liu, Yuliang Li, Dezhi Zhang, Qingchun Zhu, Xiaoqing Shang, Xiaoqin Zeng. Origin of twin-like {33-64} tilt boundary and associated solute segregation in a high strain rate deformed Mg-Y alloy. Scripta Materialia, 2021(201): 113982.
11.Shuai Xu, Xiaoqing Shang, Haiming Zhang, Xianghuai Dong, Zhenshan Cui. Size Effects on the Mechanical Responses and Deformation Mechanisms of AZ31 Mg Foils. Metallurgical and Materials Transactions A, 2021(52): 3585-3599.
12.Mingxiang Liu, Zhenshan Cui, Xiaoqing Shang, Shan Zhou. Comparative Study on the Microstructure Characteristics and Enhanced Mechanical Properties of Spray Formed GCr15 Bearing Steel. Steel Research International, 2018(89): 1700529.
13.Chao Feng, Zhenshan Cui, Xiaoqing Shang, Mingxiang Liu. An evolution model for elliptic-cylindrical void in viscous materials considering the evolvements of void shape and orientation. Mechanics of Materials, 2017(112): 101-113.
14.Chao Feng, Zhenshan Cui, Mingxiang Liu, Xiaoqing Shang, Dashan Sui, Juan Liu. Investigation on the void closure efficiency in cogging processes of the large ingot by using a 3-D void evolution model. Journal of Materials Processing Technology, 2016(237): 371-385.
2. Xiaoqing Shang, Haiming Zhang, Zhenshan Cui, M.W. Fu, Jianbo Shao. A multiscale investigation into the effect of grain size on void evolution and ductile fracture: Experiments and crystal plasticity modeling, International Journal of Plasticity, 2020(125): 133-149.
3.Xiaoqing Shang, Zhenshan Cui, M.W. Fu. Dynamic recrystallization based ductile fracture modeling in hot working of metallic materials. International Journal of Plasticity, 2017(95):105-122.
4.Xiaoqing Shang, Zhenshan Cui, M.W. Fu. A ductile fracture model considering stress state and Zener-Hollomon parameter for hot deformation of metallic materials. International Journal of Mechanical Sciences, 2018(144): 800-812.
5.Yangqi Li, Haiming Zhang, Xiaoqing Shang, Mingxiang Liu, Shilin Zhao, Zhenshan Cui. A multiscale investigation on the preferential deformation mechanism of coarse grains in the mixed-grain structure of 316LN steel. International Journal of Plasticity, 2022(152):103244,
6.Qingchun Zhu, Xiaoqing Shang, Huan Zhang, Xixi Qi, Yangxin Li, Xiaoqin Zeng. Influence of Al2Y particles on mechanical properties of Mg-11Y-1Al alloy with different grain sizes.Materials Science and Engineering: A, 2022(831): 142166.
7.Chuanyuan Mao, Weijun Yu, Min Jin, Yingchen Wang, Xiaoqing Shang, Lu Lin, Xiaoqin Zeng, Liqiang Wang, Eryi Lu. Mechanobiologically optimized Ti-35Nb-2Ta-3Zr improves load transduction and enhances bone remodeling in tilted dental implant therapy. Bioactive Materials, 2022(16): 15-26.
8.Sheng Zhang, Leyun Wang, Gaoming Zhu, Martin Diehl, Alireza Maldar, Xiaoqing Shang, Xiaoqin Zeng. Predicting grain boundary damage by machine learning. International Journal of Plasticity, 2022(150): 103186.
9.Gaoming Zhu, Leyun Wang, Yingjun Sun, Xiaoqing Shang, Jie Wang, Huamiao Wang, Xiaoqin Zeng. Grain-size effect on the deformation of Mg-3Al-3Sn alloy: Experiments and elastic viscoplastic self-consistent modeling. International Journal of Plasticity, 2021(143):103018.
10.Huan Zhang, Yangxin Li, Zhigang Ding, Tian Xie, Ruixue Liu, Yuliang Li, Dezhi Zhang, Qingchun Zhu, Xiaoqing Shang, Xiaoqin Zeng. Origin of twin-like {33-64} tilt boundary and associated solute segregation in a high strain rate deformed Mg-Y alloy. Scripta Materialia, 2021(201): 113982.
11.Shuai Xu, Xiaoqing Shang, Haiming Zhang, Xianghuai Dong, Zhenshan Cui. Size Effects on the Mechanical Responses and Deformation Mechanisms of AZ31 Mg Foils. Metallurgical and Materials Transactions A, 2021(52): 3585-3599.
12.Mingxiang Liu, Zhenshan Cui, Xiaoqing Shang, Shan Zhou. Comparative Study on the Microstructure Characteristics and Enhanced Mechanical Properties of Spray Formed GCr15 Bearing Steel. Steel Research International, 2018(89): 1700529.
13.Chao Feng, Zhenshan Cui, Xiaoqing Shang, Mingxiang Liu. An evolution model for elliptic-cylindrical void in viscous materials considering the evolvements of void shape and orientation. Mechanics of Materials, 2017(112): 101-113.
14.Chao Feng, Zhenshan Cui, Mingxiang Liu, Xiaoqing Shang, Dashan Sui, Juan Liu. Investigation on the void closure efficiency in cogging processes of the large ingot by using a 3-D void evolution model. Journal of Materials Processing Technology, 2016(237): 371-385.
学术兼职
Xiaoqing Shang, Haiming Zhang, Leyun Wang, Gaoming Zhu, Zhenshan Cui, M.W. Fu,Xiaoqin Zeng. The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy. International Journal of Plasticity, 2021(144): 103040.
2. Xiaoqing Shang, Haiming Zhang, Zhenshan Cui, M.W. Fu, Jianbo Shao. A multiscale investigation into the effect of grain size on void evolution and ductile fracture: Experiments and crystal plasticity modeling, International Journal of Plasticity, 2020(125): 133-149.
Xiaoqing Shang, Zhenshan Cui, M.W. Fu. Dynamic recrystallization based ductile fracture modeling in hot working of metallic materials. International Journal of Plasticity, 2017(95):105-122.
Xiaoqing Shang, Zhenshan Cui, M.W. Fu. A ductile fracture model considering stress state and Zener-Hollomon parameter for hot deformation of metallic materials. International Journal of Mechanical Sciences, 2018(144): 800-812.
Yangqi Li, Haiming Zhang, Xiaoqing Shang, Mingxiang Liu, Shilin Zhao, Zhenshan Cui. A multiscale investigation on the preferential deformation mechanism of coarse grains in the mixed-grain structure of 316LN steel. International Journal of Plasticity, 2022(152):103244,
Qingchun Zhu, Xiaoqing Shang, Huan Zhang, Xixi Qi, Yangxin Li, Xiaoqin Zeng. Influence of Al2Y particles on mechanical properties of Mg-11Y-1Al alloy with different grain sizes.Materials Science and Engineering: A, 2022(831): 142166.
Chuanyuan Mao, Weijun Yu, Min Jin, Yingchen Wang, Xiaoqing Shang, Lu Lin, Xiaoqin Zeng, Liqiang Wang, Eryi Lu. Mechanobiologically optimized Ti-35Nb-2Ta-3Zr improves load transduction and enhances bone remodeling in tilted dental implant therapy. Bioactive Materials, 2022(16): 15-26.
Sheng Zhang, Leyun Wang, Gaoming Zhu, Martin Diehl, Alireza Maldar, Xiaoqing Shang, Xiaoqin Zeng. Predicting grain boundary damage by machine learning. International Journal of Plasticity, 2022(150): 103186.
Gaoming Zhu, Leyun Wang, Yingjun Sun, Xiaoqing Shang, Jie Wang, Huamiao Wang, Xiaoqin Zeng. Grain-size effect on the deformation of Mg-3Al-3Sn alloy: Experiments and elastic viscoplastic self-consistent modeling. International Journal of Plasticity, 2021(143):103018.
Huan Zhang, Yangxin Li, Zhigang Ding, Tian Xie, Ruixue Liu, Yuliang Li, Dezhi Zhang, Qingchun Zhu, Xiaoqing Shang, Xiaoqin Zeng. Origin of twin-like {33-64} tilt boundary and associated solute segregation in a high strain rate deformed Mg-Y alloy. Scripta Materialia, 2021(201): 113982.
Shuai Xu, Xiaoqing Shang, Haiming Zhang, Xianghuai Dong, Zhenshan Cui. Size Effects on the Mechanical Responses and Deformation Mechanisms of AZ31 Mg Foils. Metallurgical and Materials Transactions A, 2021(52): 3585-3599.
Mingxiang Liu, Zhenshan Cui, Xiaoqing Shang, Shan Zhou. Comparative Study on the Microstructure Characteristics and Enhanced Mechanical Properties of Spray Formed GCr15 Bearing Steel. Steel Research International, 2018(89): 1700529.
Chao Feng, Zhenshan Cui, Xiaoqing Shang, Mingxiang Liu. An evolution model for elliptic-cylindrical void in viscous materials considering the evolvements of void shape and orientation. Mechanics of Materials, 2017(112): 101-113.
Chao Feng, Zhenshan Cui, Mingxiang Liu, Xiaoqing Shang, Dashan Sui, Juan Liu. Investigation on the void closure efficiency in cogging processes of the large ingot by using a 3-D void evolution model. Journal of Materials Processing Technology, 2016(237): 371-385.
2. Xiaoqing Shang, Haiming Zhang, Zhenshan Cui, M.W. Fu, Jianbo Shao. A multiscale investigation into the effect of grain size on void evolution and ductile fracture: Experiments and crystal plasticity modeling, International Journal of Plasticity, 2020(125): 133-149.
Xiaoqing Shang, Zhenshan Cui, M.W. Fu. Dynamic recrystallization based ductile fracture modeling in hot working of metallic materials. International Journal of Plasticity, 2017(95):105-122.
Xiaoqing Shang, Zhenshan Cui, M.W. Fu. A ductile fracture model considering stress state and Zener-Hollomon parameter for hot deformation of metallic materials. International Journal of Mechanical Sciences, 2018(144): 800-812.
Yangqi Li, Haiming Zhang, Xiaoqing Shang, Mingxiang Liu, Shilin Zhao, Zhenshan Cui. A multiscale investigation on the preferential deformation mechanism of coarse grains in the mixed-grain structure of 316LN steel. International Journal of Plasticity, 2022(152):103244,
Qingchun Zhu, Xiaoqing Shang, Huan Zhang, Xixi Qi, Yangxin Li, Xiaoqin Zeng. Influence of Al2Y particles on mechanical properties of Mg-11Y-1Al alloy with different grain sizes.Materials Science and Engineering: A, 2022(831): 142166.
Chuanyuan Mao, Weijun Yu, Min Jin, Yingchen Wang, Xiaoqing Shang, Lu Lin, Xiaoqin Zeng, Liqiang Wang, Eryi Lu. Mechanobiologically optimized Ti-35Nb-2Ta-3Zr improves load transduction and enhances bone remodeling in tilted dental implant therapy. Bioactive Materials, 2022(16): 15-26.
Sheng Zhang, Leyun Wang, Gaoming Zhu, Martin Diehl, Alireza Maldar, Xiaoqing Shang, Xiaoqin Zeng. Predicting grain boundary damage by machine learning. International Journal of Plasticity, 2022(150): 103186.
Gaoming Zhu, Leyun Wang, Yingjun Sun, Xiaoqing Shang, Jie Wang, Huamiao Wang, Xiaoqin Zeng. Grain-size effect on the deformation of Mg-3Al-3Sn alloy: Experiments and elastic viscoplastic self-consistent modeling. International Journal of Plasticity, 2021(143):103018.
Huan Zhang, Yangxin Li, Zhigang Ding, Tian Xie, Ruixue Liu, Yuliang Li, Dezhi Zhang, Qingchun Zhu, Xiaoqing Shang, Xiaoqin Zeng. Origin of twin-like {33-64} tilt boundary and associated solute segregation in a high strain rate deformed Mg-Y alloy. Scripta Materialia, 2021(201): 113982.
Shuai Xu, Xiaoqing Shang, Haiming Zhang, Xianghuai Dong, Zhenshan Cui. Size Effects on the Mechanical Responses and Deformation Mechanisms of AZ31 Mg Foils. Metallurgical and Materials Transactions A, 2021(52): 3585-3599.
Mingxiang Liu, Zhenshan Cui, Xiaoqing Shang, Shan Zhou. Comparative Study on the Microstructure Characteristics and Enhanced Mechanical Properties of Spray Formed GCr15 Bearing Steel. Steel Research International, 2018(89): 1700529.
Chao Feng, Zhenshan Cui, Xiaoqing Shang, Mingxiang Liu. An evolution model for elliptic-cylindrical void in viscous materials considering the evolvements of void shape and orientation. Mechanics of Materials, 2017(112): 101-113.
Chao Feng, Zhenshan Cui, Mingxiang Liu, Xiaoqing Shang, Dashan Sui, Juan Liu. Investigation on the void closure efficiency in cogging processes of the large ingot by using a 3-D void evolution model. Journal of Materials Processing Technology, 2016(237): 371-385.
